Home / Products / Industry / Leather Chemicals / Beam House Chemicals / Venlime A

Beam House Chemicals

Venlime A

VENLIME A is liming agent for use in beam house in the unhairing stage.

VENLIME A is liming agent for use in beam house in the unhairing stage.

Product range

Characteristics

  • AppearanceColourless to yellowish liquid
  • Density @ 250C1.02-1.06 g/cc
  • pH10 -12

Application

  • For bovine hides1 - 2 % is recommended
  • For Calf skins (direct liming)0.75% - 1.75% in the beginning and 0.25% at the end
  • For Skins1 - 1.5% for direct liming,
  • 0.51% in the paste for paint method,
  • 0.51% in the drum

(Drop in pH is normal over prolonged storage. However this will not affect product performance in any which way)

• It accelerates dissolution of lime and therefore penetration is improved. • Its usage minimizes wrinkle development in the pelt which helps in achieving flat grain.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Venlime A

Specification, samples and documents for Venlime A, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENLIME A is liming agent for use in beam house in the unhairing stage. CHARACTERISTICS: Appearance : Colourless to yellowish liquid. Density @ 250C : 1.02-1.06 g/cc pH : 10 -12(Drop in pH is normal over prolonged storage. However this will not affect product performance in any which way)SPECIAL FEATURES:• It accelerates dissolution of lime and therefore penetration is improved.

Use the sample form and name Venlime A together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Venlime A are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Beam House Chemicals is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Venlime A is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team