Home / Products / Industry / Leather Chemicals / Beam House Chemicals / Vendelime Z

Beam House Chemicals

Vendelime Z

VENDELIME Z is ammonium salts free deliming agent for use in beam house operations.

VENDELIME Z is ammonium salts free deliming agent for use in beam house operations.

Product range

Characteristics

  • AppearanceWhite powder
  • pH (1% in water)1.0 -3.0

Application

  • 0 - 3.0 % (based on unsplit limed pelt wt)
  • 0 - 2.5% (based on limed split pelt wt.)
  • Skins0.5 - 1.25% (on pelt wt.)
  • Calves0.5 - 1.5% (on pelt wt.)
  • 5 - 1.0% for exhaustion of chrome in the liquor thru masking

This product is to be added after the pre-wash at the beginning of deliming to ensure near complete deliming for skins and splits.

It can be used in both predeliming and main deliming stages. The float has to be lesser in comparison to conventional ammonium salts based products for speedier penetration of this product in to the pelts to ensure effective and complete deliming.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Vendelime Z

Specification, samples and documents for Vendelime Z, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENDELIME Z is ammonium salts free deliming agent for use in beam house operations. CHARACTERISTICS: Appearance : White powder pH (1% in water) : 1.0 -3.0SPECIAL FEATURES:• It is free of ammonium salts and nitrogen based products. • Being completely free from any nitrogenous product, it will not increase any effluent load on discharge from tannery.

Use the sample form and name Vendelime Z together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Vendelime Z are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Beam House Chemicals is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Vendelime Z is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team