Home / Products / Industry / Leather Chemicals / Finishing - Binders / Venres Binder 76

Finishing - Binders

Venres Binder 76

VENRES BINDER 76 is aqueous anionic polyacrylate dispersion. It produces very soft, elastic and slightly tacky film in finishing of leather.

VENRES BINDER 76 is aqueous anionic polyacrylate dispersion. It produces very soft, elastic and slightly tacky film in finishing of leather.

Product range

Characteristics

  • AppearanceBluish white translucent emulsion
  • pH7.5 - 9.5
  • Solid content21 - 23%

Application

  • SHELF LIFEMinimum 06 months if stored in dry & cool place in closed container under normal conditions

• It produces fine grain break when used as impregnation binder. • It is also suitable for suede leather in pad & spray applications.

It can be used for impregnation and in base coat for full grain leather.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Venres Binder 76

Specification, samples and documents for Venres Binder 76, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENRES BINDER 76 is aqueous anionic polyacrylate dispersion. It produces very soft, elastic and slightly tacky film in finishing of leather.CHARACTERISTICS : Appearance : Bluish white translucent emulsion pH : 7.5 - 9.5 Solid content : 21 - 23%SPECIAL FEATURES:• It produces fine grain break when used as impregnation binder. • It is also suitable for suede leather in pad & spray applications.

Use the sample form and name Venres Binder 76 together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Venres Binder 76 are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Finishing - Binders is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Venres Binder 76 is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team