Home / Products / Industry / Leather Chemicals / Finishing - Binders / Venres Binder 10

Finishing - Binders

Venres Binder 10

VENRES BINDER 10 is aqueous polyacrylate dispersion. It produces very soft film with low tackiness.

VENRES BINDER 10 is aqueous polyacrylate dispersion. It produces very soft film with low tackiness.

Product range

Characteristics

  • AppearanceBluish white translucent emulsion
  • pH6.5 - 7.5
  • Solid content35 - 37%

Application

  • For grain impregnation150-200 g/m2 by spraying
  • SHELF LIFEMinimum 06 months if stored in dry & cool place in closed container under normal conditions

• Can be used as a component for grain-tightening impregnations on buffed and full grain leathers. • Can be used in top coats for good smoothness and outstanding fastness properties.

VENRES BINDER 10 can be used to a great advantage in finishing shoe upper, upholstery and similar leathers for better adhesion, rub fastness and overall properties.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Venres Binder 10

Specification, samples and documents for Venres Binder 10, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENRES BINDER 10 is aqueous polyacrylate dispersion. It produces very soft film with low tackiness.CHARACTERISTICS : Appearance : Bluish white translucent emulsion pH : 6.5 - 7.5 Solid content : 35 - 37%SPECIAL FEATURES:• Can be used as a component for grain-tightening impregnations on buffed and full grain leathers.

Use the sample form and name Venres Binder 10 together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Venres Binder 10 are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Finishing - Binders is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Venres Binder 10 is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team