Home / Products / Industry / Leather Chemicals / Lacquers / Venolac - Ws

Lacquers

Venolac - Ws

VENOLAC - WS is a solvent based Nitrocellulose lacquer, dilutable with either water or any suitable NC thinner. It is used for finishing of leather.CHARACTERISTICS :Appearance : P...

Product range

  • VENOLACWS is a solvent based Nitrocellulose lacquer, dilutable with either water or any suitable NC thinner. It is used for finishing of leather

Characteristics

  • AppearancePale yellow clear liquid of medium viscosity
  • Solids Content26 ? 1%
  • Compatible withSolvent based dye solutions
  • SolubilityDilutable with either water or any suitable NC thinner

Application

  • VENOLACWS gives a silky and smooth high gloss to the leather surface, combined with a soft handle
  • For dilution with water, simply add 12 parts (as desired) water to 1 part lacquer and stir till uniform. Let stand for 10 minutes, stir again and use
  • SHELF LIFEMinimum 06 months if stored in dry & cool place in closed container under normal conditions

For dilution with solvent, it may be diluted with up to 3 parts NC thinner or Butyl Acetate.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Venolac - Ws

Specification, samples and documents for Venolac - Ws, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENOLAC - WS is a solvent based Nitrocellulose lacquer, dilutable with either water or any suitable NC thinner.

Use the sample form and name Venolac - Ws together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Venolac - Ws are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Lacquers is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Venolac - Ws is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team