Home / Products / Industry / Leather Chemicals / Lacquers / Venolac - Lmf

Lacquers

Venolac - Lmf

VENOLAC - LMF is a versatile Nitrocellulose lacquer emulsion, giving optimum properties of gloss, rub fastness, flexural endurance, and feel to the leather when used for finishing...

Product range

  • VENOLACLMF is a versatile Nitrocellulose lacquer emulsion, giving optimum properties of gloss, rub fastness, flexural endurance, and feel to the leather when used for finishing in leather industry

Characteristics

  • AppearanceWhite emulsion
  • Solids Content14 ? 1%
  • SolubilityDilutable with water

Application

  • VENOLACLMF is used as the top glossy and protective coat on resin finished leathers. It reduces tack and allows high temperature ironing (up to 100°C) of finished leathers
  • It is a normal practice to use either 1:1 or 1:1/2: LMF : Water, and spray on leathers depending on the gloss and fastness desired
  • SHELF LIFEMinimum 06 months if stored in dry & cool place in closed container under normal conditions

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Venolac - Lmf

Specification, samples and documents for Venolac - Lmf, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENOLAC - LMF is a versatile Nitrocellulose lacquer emulsion, giving optimum properties of gloss, rub fastness, flexural endurance, and feel to the leather when used for finishing in leather industry.CHARACTERISTICS :Appearance : White emulsion Solids Content : 14 ? 1% Solubility : Dilutable with water APPLICATION :VENOLAC - LMF is used as the top glossy and protective coat on resin finished leathers.

Use the sample form and name Venolac - Lmf together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Venolac - Lmf are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in Lacquers is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Venolac - Lmf is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team