Home / Products / Industry / Leather Chemicals / WET END - SYNTANS (Powders) / Ventan Wrs

WET END - SYNTANS (Powders)

Ventan Wrs

VENTAN WRS is phenolic replacement syntan for producing white leathers.

VENTAN WRS is phenolic replacement syntan for producing white leathers.

Product range

Characteristics

  • AppearanceWhite to creamish powder
  • % moisture content5.0 max
  • SolubilityFreely soluble in water
  • pH of 10% solution3.0 - 4.0

Special Features

  • • It has full self-tanning properties

Application

  • The recommended dosage is 56 %, on shaved wt., for white upper leathers
  • The recommended dosage is 23% for pretreatment of leathers to be retanned with vegetable tannins
  • The recommended dosage is 58 %, on shaved wt., for drum dyed shoe upper / Nubuck

Minimum 12 months if stored in dry & cool place in closed container under normal conditions.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Ventan Wrs

Specification, samples and documents for Ventan Wrs, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENTAN WRS is phenolic replacement syntan for producing white leathers.CHARACTERISTICS: Appearance : White to creamish powder % moisture content : 5.0 max. Solubility : Freely soluble in water. pH of 10% solution : 3.0 - 4.0SPECIAL FEATURES:• It bleaches chrome leather to a clear and level white shade. The leather has a full handle with a tight and flat grain.

Use the sample form and name Ventan Wrs together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Ventan Wrs are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in WET END - SYNTANS (Powders) is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Ventan Wrs is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team