Home / Products / Industry / Leather Chemicals / WET END - SYNTANS (Powders) / Ventan Dps

WET END - SYNTANS (Powders)

Ventan Dps

VENTAN DPS is dye leveling and dispersing syntan for vegetable and resin tannins used in leather industry.

VENTAN DPS is dye leveling and dispersing syntan for vegetable and resin tannins used in leather industry.

Product range

Characteristics

  • AppearanceBeige coloured powder
  • % moisture content5.0 max
  • SolubilityFreely soluble in water
  • pH of 10% solution6.5 - 7.5

Special Features

  • • It is compatible with anionic and non-ionic products

The recommended dosage is 1-2 %, on shaved wt., for level dyeing and penetration of dye on chrome / vegetable tanned leathers.

Minimum 12 months if stored in dry & cool place in closed container under normal conditions.

Next step

Need a specification for this chemistry?

Tell us the substrate, EO/PO moles and the application. We will confirm a catalogue grade or a custom batch.

Request a sample Request SDS / TDS

FAQs

Questions about Ventan Dps

Specification, samples and documents for Ventan Dps, taken from this catalogue page.

  • 4On this page
  • SDSOn request
  • QALot release
Ask the manufacturing team

VENTAN DPS is dye leveling and dispersing syntan for vegetable and resin tannins used in leather industry.CHARACTERISTICS: Appearance : Beige coloured powder % moisture content : 5.0 max. Solubility : Freely soluble in water. pH of 10% solution : 6.5 - 7.5 SPECIAL FEATURES:• It is compatible with anionic and non-ionic products.

Use the sample form and name Ventan Dps together with the intended process, substrate and any EO/PO, HLB, cloud-point or active-content window. Laboratory quantities ship after a short company check, with SDS and TDS when those boxes are ticked. A catalogue grade can be confirmed, or a custom batch planned on the Kandla plants.

Yes. SDS, TDS and COA for Ventan Dps are issued to identified companies after a short verification — they are not open downloads. COA is lot-specific; if a commercial lot has not been allocated, typical TDS data is sent first and the COA follows the production batch. Request files from the documents form.

Dyna Glycols custom-manufactures when a catalogue point in WET END - SYNTANS (Powders) is close but not exact. Write the hydrophobe or acid/alcohol pair, the analytical window, pack and annual volume. Once a trial lot of Ventan Dps is approved, freeze the TDS so later drums match the evaluation.

Still specifying a grade?

Send the process step and the analytical window. The Kandla team will confirm a catalogue grade or a custom batch.

Request a sample

Work with Dyna Glycols

Need a surfactant specification for your process?

Talk to our team